How Do I Identify My Actuator Motor?
Your actuator motor can be easily identified by a SPEC number, which is stamped directly in the housing near where the shaft comes out of the motor. This number IS REQUIRED before we can assist you with your replacement needs.
How Do I Identify My Actuator Motor?
Your actuator motor can be easily identified by a SPEC number, which is stamped directly in the housing by the shaft extension. This number typically begins with a UL designation (i.e. UL6 or UL14) followed by a four or five digit number. This number is required before we can assist you with your replacement needs.
HVAC Actuators
Multi Products has been designing and manufacturing our exclusive line of Torque Box actuator motors for the HVAC industry for over 50 years. Our products are trusted across the HVAC industry for reliability and performance.
Below is a listing of just a few of our most common HVAC actuator replacement motors, all listed by their SPEC number. These units are in stock and ready to ship. We still manufacture many actuators made to order, which are ready for shipment within 7-10 days of placing your order. Contact us if your SPEC number is not listed below.
If you require springs, linkages, or damper information you must contact the damper manufacturer or installer of your ventilation system. Click here for wiring / connection information.
SPEC NUMBERS 3049 AND 3050 CAN BE PURCHASED DIRECTLY FROM GRAINGER INDUSTRIAL SUPPLY. PART NUMBER 24N066.
In-Stock Listing
| Spec # | Voltage | Rotation | Special Notes | |
|---|---|---|---|---|
|
120 |
CW |
TB2001, 2 Flat X 1.13” Long Shaft, Conduit Connector, |
Details | |
|
120 |
CCW |
TB2001, 2 Flat X 1.13” Long Shaft, Conduit Connector, |
Details | |
|
120 |
CW |
TB2001, 0.19” SQ X 1.00” Long Shaft, Ratchet, |
Details | |
|
120 |
CW |
TB2001, 2 Flat X 0.88” Long Shaft, Ratchet, Handybox (top), |
Details | |
|
120 |
CW |
TB2001, 0.19” SQ X 0.75” Long Shaft, Ratchet, |
Details | |
|
120 |
CCW |
TB2001, 2 Flat X 1.50” Long Shaft, Conduit Connector, |
Details | |
|
120 |
CCW |
TB2001, Dual Extensions, 2 Flat, 1.75” Long Shaft, |
Details | |
|
24 |
CCW |
TB2001, Dual Extensions, 2 Flat, 1.75” Long Shaft, |
Details | |
|
120 |
CCW |
TB2001, 2 Flat X 1.13” Long Shaft, Conduit Connector, |
Details | |
|
120 |
CW |
TB2001, Dual Extension, Ø0.50” X 3.50” / Ø0.31” X 2.50” (front / back) Long Shaft, Ratchet, Flying Leads (right side), |
Details | |
|
120/240 |
CW |
TB2001, 2 Flat, 1.13” Long Shaft, Handybox (back), |
Details | |
|
120/240 |
CCW |
TB2001, Dual Extension, 2 Flat, 1.75” Long Shaft, |
Details | |
|
120/240 |
CCW |
TB2001, 2 Flat, 1.125” Long Shaft, |
Details |